GE DS200KLDCG1AAA Push-button/LED/display panel Fast delivery time

GE DS200KLDCG1AAA is a push-button/LED/display panel for GE Mark V generators. The panel consists of 32 LEDs, 21 4-digit displays, and one jumper.

The LEDs on the panel are used to indicate the status of the generator, such as operating status, alarm status, and maintenance status. The displays are used to display text and other information, such as engine speed, voltage, and current.

The jumper on the panel is used to modify the behavior of the panel, such as changing the display sequence or enabling special functions.

The panel is mounted to the generator cabinet with four screws that go through the four corner holes. These holes will align with the screw holes in the cabinet rack in the generator.

Before removing a defective panel, observe the location where the panel is installed and how the wiring is routed in the cabinet. The cables are important because they help protect the generator from high-voltage interference if the signal cables are near high-voltage lines. In addition, the cables help maintain airflow. Poor wiring can obstruct airflow and cause components to overheat.

Here are the features and specifications of the GE DS200KLDCG1AAA:

• LEDs: 32
• Displays: 21 4-digit
• Jumper: 1
• Connection: 40-pin connection strip
• Voltage: 24 VDC
• Current: 1 A
• Dimensions: 10.2 x 7.6 x 1.7 inches (260 x 193 x 43 mm)
• Weight: 0.7 pounds (320 grams)

For more information about the GE DS200KLDCG1AAA, please refer to the documentation provided with the panel.

Here are some additional details about the panel:

• The LEDs are arranged in a 4 x 8 grid on the front of the panel.
• The displays are arranged in a 5 x 4 grid on the front of the panel.
• The jumper is located on the back of the panel.
• The panel is connected to the generator using a 40-pin connection strip.
• The panel requires a 24 VDC power supply.

I hope this information is helpful. Please let me know if you have any other questions.